Clean CPAP Machine and Humidifier

-Please power off the CPAP machine before sanitization. For the CPAP machine configured with humidifier, drain water in reservoir before stating the sanitization process.

-Disconnect the mask end of the tubing from your CPAP mask and connect the mask end of the tubing with CleanerOnly.

-Press and hold the power button for 2 seconds till the buzzer beeps and the operation indicator of 30 minutes turns light.

-Activated oxygen will stream for 20 minutes then the device will circulate fresh air for 10 minutes of fresh air will remove most of the residual ozone which may be unpleasant to some users.

-After the programmed sanitization cycle for 30 minutes, the device will automatically power off and sound off with one beep. The operation indicator will be turned off.

-The sanitization process can disinfect both CPAP machine and humidifier in one sanitization cycle.

-If for any reasons the user wants to manually turn off the power during the sanitization process, press and hold the power button for 2 seconds. The machine will sound off with beep and indicator light will be off.

-After sanitization process, wait for 30 to 60 minutes before using the CPAP machine to insure the odor has dissipated.