Clean Mask and Tubing

-Disconnect the CPAP end of the tubing from your CPAP machine and connect the CPAP end of the tubing with CleanerOnly.

-Use the travel bag to enclose your full face or nasal mask.

-Press and hold the power button for 2 seconds till the buzzer beeps and the operation indicator of 30 minutes turns light. Press the power button once to switch to 20 minutes cycle and the indicator of 20 minutes turns light.

-Activated oxygen will stream for 10 minutes then the device will circulate fresh air for 10 minutes. The last 10 minutes of fresh air will remove most of the residual ozone which may be unpleasant to some users.

-After the programmed sanitization cycle for 20 minutes, the device will automatically power off and sound off with one beep. The operationg indicator will be turned off.

-If for any reasons the user wants to manually turn off the power during the sanitization process, press and hold the power button for 2 seconds. The machine will sound off with beep and indicator light will be off.

-After sanitization process, wait for 30 to 60 minutes before using the CPAP mask to insure the odor has dissipated.